Sansui SAP201V User's Guide download pdf (Page 5)

Page | 6 © Sansui UK 2012 SAP201V IB Ver 1.0 Rev 0.0

2. Safety Information

The following safety and hazard warnings are not only

for the protection of your device, but also serve as a

protection against potential health hazards. Please

take time to read the following instructions carefully.

We assume no liability for personal or property

damage resulting from the failure to comply

with the safety instructions, or from improper

operation or handling. Under such

circumstances, all claims under warranty will

become void

- For safety and licensing (CE) reasons any

unauthorized modification and/or changes to

the device is prohibited and will void the

warranty and all warranty claims.

- Any persons operating, installing, setting up, or

servicing this device must be trained and

qualified accordingly, and observe these

operating instructions.

- Ensure that the device has been set up correctly

by following all the instructions found in the

instruction manual

- This is a protection class II device. Make sure that

the voltage supply of the power outlet used

meets the required voltage specifications

230V/~50 Hz.

- Power supply cables should be routed so that

they are not likely to be walked on, squashed or

pinched by items placed upon or against them.

Pay particular attention to cords at plugs, power

outlets, and at the point at which they exit from

the device. Avoid exposing the cable to

extreme heat or cold. Ignoring the above

mentioned instructions could result in cable

damage and present the danger of an electric

shock.

- Should any obvious damage be seen on the

device or on the connection cables, do not

contact them in any way. Switch of the

corresponding circuit breaker in the power

distribution panel first, before carefully

unplugging the power plug from the wall outlet.

Do not operate the device further! Please

contact or take it to a qualified service

technician or specialty workshop.

- In order to completely cut off the power supply

to the device, unplug the power plug from the

wall outlet. Merely turning the device off with the

ON/OFF button is not sufficient. Also make sure

that power outlets are easily accessible.

- Always pull on the plug’s grips and never on the

cable to remove it from a wall outlet. Unplug the

device from the power outlet if not in use for a

longer period of time.

- For safety reasons, always unplug the device

from the power outlet during thunder storms.

- Eliminate potential tripping hazards by routing

cables in such a way that no one can trip or

stumble over them.

- Never use the device, if the power cable or

device is damaged.

- Keep packaging and protective foil away from

children at all times to avoid the danger of

suffocation.

- The device should never come into contact with

water or moisture.

- To prevent the risk of fire or electric shock make

sure that liquids, such as dripping or splashing

water, rain or moisture, do not come in contact

with the device and power supply plug

- Operate this device in a moderate climate and

never expose it to extreme temperatures, such

as high humidity.

- Condensation can build up suddenly if the

device is brought from a colder area into a

warmer area (e.g. when transporting). Should

this happen, allow the device to warm up to

room temperature first before using.

- Care should be taken so that liquids do not

come in contact with the interior, this is why

containers containing liquids, e.g. buckets, vases

or plants should never be placed anywhere near

this product, including the power supply plug.

This could not only damage the device, but also

present a fire hazard.

- It is imperative to avoid contact with moisture,

e.g. never operate in the bathroom.

- Make sure the device is properly ventilated

during operation and never operate it in

constricted areas, such as for example in a

bookcase or shelf. Never block ventilation

openings with magazines, tablecloths, curtains

or similar.

- Make sure the device is placed on a firm and

stable surface.

- Never place any sources of fire on top of or near

the device and power supply plug (e.g. lighted

candle).

- Please note that excessive sound pressure

created when listening to loud volume levels

with earphones or headphones can lead to

permanent hearing damage.

- Please adhere to the additional safety

information found in the individual chapters of

this instruction manual.

- When connecting other devices, please refer to

the safety and operating instructions found in

the literature accompanying the device.

- Please contact our technical hotline or a service

technician for further information, should you be

in doubt about device operation, safety or when

making connections, or if any questions arise

that are not explained within this manual.

- Contribute to a better environment by using a

designated recycling site for the disposal of

packaging material.

1 2 3 4 5 6 7 8 9 10 ... 21 22

Comments to this Manuals

No comments

Sansui SAP201V User's Guide Page 5

Comments to this Manuals